If the screen on your V16 controller isn't working, let's go through a few possible causes and solutions:
Power Supply Check: Confirm that the controller is properly connected to a reliable power source. If the power supply is unstable or interrupted, the screen may not turn on.
Cables and Connections: Check all cables and connections, especially around the power supply and the controller. Loose or damaged connections can prevent the screen from displaying.
Fuse Issues: Some controllers have an internal fuse that can blow if there’s a surge or short circuit. If you know where the fuse is located, inspect it (or let a technician inspect it) to see if it needs replacement.
Brightness Settings: Check if there’s a way to adjust the screen brightness on the V16. If the brightness is set too low or has been turned off, the display might appear to be non-functional.
Software or Firmware Glitch: Occasionally, a software glitch can cause the screen to freeze or go blank. Try resetting the controller by powering it off completely, waiting a few moments, and then turning it back on.
Screen Damage or Faulty Screen: If the screen itself has been damaged (e.g., by impact or water exposure), it may need to be repaired or replaced.
If none of these checks solve the problem, we may need to escalate this to a technical advisor.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article