What filters are used in the Smartank 650 and how often do they need replacing

The Smartank™ 650 system uses a series of filters, including:

1. Prefilters:

   • Sediment filter
   • Granular activated carbon filter
   • Carbon block filter

2. Reverse Osmosis (RO) Membrane:

   • Removes up to 98% of impurities.

3. De-ionising (DI) Filter:

   • Polishes the water to achieve 0 ppm TDS (Total Dissolved Solids).

Replacement Schedule:

• Prefilters: Should be replaced quarterly or after approximately 25,000 litres of mains water usage.
• RO Membrane: Replace yearly or after approximately 250,000 litres of processed water.
• DI Filter Resin: Replace when the TDS reading exceeds 5 ppm or as needed.

Maintenance Recommendations:

• Perform weekly checks on TDS levels.
• Conduct monthly and quarterly system inspections to ensure filters are operating correctly.

If you'd like detailed guidance on filter replacement, let me know!

Part Codes:

Here are the part codes for the relevant filters and components of the Smartank™ 650 system:

1. Prefilters (Sediment, Carbon, Carbon Block):

   • Product Code: KIT02310-CLK.

2. Reverse Osmosis (RO) Membrane:

   • Product Code: MB115 or S-MRO-4040-F.

3. De-ionising (DI) Resin Beads:

   • Product Code for replacement resin: MB115.

4. Pump Components:

   • Inline strainer filter and associated parts: Product Codes SF-DP30-014-150 or SF-DP30-014-100.

These codes can be used to order replacements or spares directly from Streamline or their authorised distributors. Let me know if further assistance is needed!